Description
Cla-Val 34 Series 1/2", 3/4", 1" Simple Lever Type Air Release Valve - Threaded Inlet/Outlet
* Ductile Iron Body
* Stainless Steel Trim and Float
* Inlet Size: 1 Inch NPT with 1/2" and 3/4" Adapters
* Pressure Class: 175 MWP
* Stock # 21056724C
* Model 34-AR332
* Easily serviced without removal from pipeline
* Working pressures to 800 psi
* Engineered for drip tight seal at low pressures
Cla-Val Series 34 Air Release Valves are designed to vent entrained air that collects at high points in a pipeline. This valve continuously eliminates air from a system by releasing small quantities of air before large air pockets can occur. In many installations, continuing accumulations of air in the pipeline (lacking air release valves); cause flow capacity to slowly decrease; power consumption slowly increases; unnoticeable at first, until flow drops dramatically, even stopping due to air blocks in the piping. Another problem resulting from excessive air accumulation is unexplained pipeline rupture. These ruptures are passed off as the result of ground settling or defective pipe, Where as in reality its large air pockets that greatly increase pressure surges (normally occurring) when flow stops and starts causing the rupture. During normal pipeline operation, air accumulation at the high point will displace the liquid within the air valve and lower the water level in relation to the float. As level of the liquid lowers, where the float is no longer buoyant, the float drops and opens the valve orifice seat and permitting accumulated air to be exhausted to atmosphere. After air is released, the liquid level in the air valve rises and closes the valve orifice seat. This cycle automatically repeats as air accumulates inside the air release valve, thereby preventing the formation of air pockets.
