Description
Swing Check Valve - Wafer Type - Carbon Steel Short Pattern Class 150- Titan CV12 CS
* Pressure / Temperature Rating:
** CS-ASTM A515 GR 70 - Class 150
* WOG (non-shock):
** 285 PSI @ 100 deg F
* Seat and Body Seal (o-ring) Temperature Range:
** Buna-N -20 ~ 250 deg F
* Robust Design
** This a self-acting, non-return, single plate, wafer type swing check valve which provides high quality and reliability within a simplified construction.
* Minimal Head Loss
** The low inertia disc is designed to open and close under low differential pressure conditions. The short pattern design and straight flow path minimize pressure drop across the valve
* Economical Design
** The low weight and short face-to-face dimensions provide an economical space saving solution. Flange gaskets are typically not required due to built in body seal o-rings
* Resilient Soft Seats
** Soft seats combined with a gravity assisted disc help to ensure a positive shutoff which creates a bubble tight seal that meets or exceeds API 598 leakage requirements.
* Versatile Design
** This valve can be installed between weld neck or slip-on type companion flanges of different standards. This valve can not be installed in a vertical pipeline with downward flow.
* Fugitive Emission Design
** The one-piece body design eliminates potential leak paths to the environment so there are no body emissions.
* Pressure / Temperature Rating:
** CS-ASTM A515 GR 70 - Class 150
* WOG (non-shock):
** 285 PSI @ 100 deg F
* Seat and Body Seal (o-ring) Temperature Range:
** Buna-N -20 ~ 250 deg F
* Robust Design
** This a self-acting, non-return, single plate, wafer type swing check valve which provides high quality and reliability within a simplified construction.
* Minimal Head Loss
** The low inertia disc is designed to open and close under low differential pressure conditions. The short pattern design and straight flow path minimize pressure drop across the valve
* Economical Design
** The low weight and short face-to-face dimensions provide an economical space saving solution. Flange gaskets are typically not required due to built in body seal o-rings
* Resilient Soft Seats
** Soft seats combined with a gravity assisted disc help to ensure a positive shutoff which creates a bubble tight seal that meets or exceeds API 598 leakage requirements.
* Versatile Design
** This valve can be installed between weld neck or slip-on type companion flanges of different standards. This valve can not be installed in a vertical pipeline with downward flow.
* Fugitive Emission Design
** The one-piece body design eliminates potential leak paths to the environment so there are no body emissions.
