A low cost, double-width arch, externally reinforced, molded butyl expansion joint with twice the movement capability of standard expansion joints.This expansion joint is commonly used in pulp and paper applications, as well as water and waste treatment. Special, hand-made versions of this joint are available in different elastomers and multiple arch types for other applications.

Expansion Joint - Series MJ-60-M

EVR

Call For Current Pricing 610-255-7071

SKU:

Flange:

Full Face Rubber

Materials:

Neoprene, Nitrile, Hypalon, Viton

Sizes:

2" - 24"

Arch Quantity:

Current Stock:

Description

Series MJ-60-M

Data Sheet

· Cost effective

· Molded elastomer design

· Wide arch profile

· Minimal sediment buildup

· Generous arch movements

· Integral retaining rings

A low cost, double-width arch, externally reinforced, moulded butyl expansion joint with twice the movement capability of standard expansion joints.

This expansion joint is commonly used in pulp and paper applications, as well as water and waste treatment. Special, hand-made versions of this joint are available in different elastomers and multiple arch types for other applications.

We Also Recommend

Virtually all pulsating equipment, such as pumps and compressors, generate vibrations in both the flow and system piping. Vibration can increase loads on equipment, reduce efficiency, and increase maintenance costs. Continuous vibration leads to settling in the system which causes misalignment. Noise from vibration can also make the work environment intolerable

EVR

Expansion Joint - Series SJ-205

The SJ-21 is the industry standard spool-type expansion joint. The SJ-21 is available in configurations from zero to four arches – depending on movement requirements – and 3 standard pressure ratings in a variety of elastomers. This hand-built expansion joint can be adapted to the most unusual or difficult applications. Available options include filled arches to eliminate settling of solids in the arch, Teflon liners for severe chemical service, soft cuff ends for slip-on installation, and concentric or eccentric tapered ends for connecting different pipe sizes.

EVR

Expansion Joint - Series SJ-21

The SJ-221 expansion joint features a unique arch design which provides greater movement capabilities without increasing face-to-face requirements. The single arch SJ-221 provides the same movement capabilities as a traditional double arch design, while the double arch SJ-222 is equivalent to a quadruple arch product. This design also increases the flexibility of the joint, resulting in lower spring rates. This means less stress on adjacent piping system components.

EVR

Expansion Joint - Series SJ-221

E-Series Thermal Expansion Tanks for Water Heaters

Price: $31.94 - $66.96

E-Series Hydronic Expansion Tanks for Heating Systems

Price: $27.56 - $127.83